A surgicalscrub cap is an essential accessory for any healthcare professional. It is used to keep hair in place and reduce the risk of contamination during medical procedures. If you’re looking for a simple and cost-effective way to make your own surgicalscrub cap , look no further! In this article, we offer a comprehensive guide to help you learn how to successfully sew a surgical scrub cap .
Materials Needed to Sew a Surgeon's " scrub cap "
To get started, you'll need to gather the materials required to make your scrub cap. Here is a list of the items you'll need:
- Cotton fabric (for the outer fabric and lining)
- Assorted sewing thread
- Sewing needle or sewing machine
- Fabric scissors
- Ruler and pencil or tailor's chalk
- Safety pins or sewing clips
- Elastic band
Pattern Making: Create a Pattern for Your Surgeon' scrub cap
Once you've gathered all the necessary materials, it's time to move on to pattern-making. The pattern is essential for ensuring a good cut and a perfect fit. To draw the pattern, follow these steps:
1. Measuring Head Circumference
Using a flexible measuring tape, measure the circumference of your head, going across the middle of your forehead and over your ears. Write down this measurement; it will be used to determine your size at scrub cap.
2. Pattern sketch for the top of the scrub cap
For the top of the scrub cap, draw a circle on the fabric using tailor's chalk or a pencil. The diameter of the circle should be equal to half the circumference of the head plus 5 cm for seam allowances.
3. Pattern sketch for the strip of the scrub cap
To make the band that goes around the scrub cap, measure a length equal to the head circumference plus 2 cm for seam allowances. The band should be 6 cm wide. Then draw a rectangle with these dimensions.
Cutting the parts for the surgical " scrub cap "
Now that you've drawn your patterns, it's time to cut out the different pieces needed to make the scrub cap.
- Cut out the circle that will form the top of the " scrub cap " from the fabric of your choice.
- Cut out two rectangles for the “ scrub cap ” band (one for the outer layer and another for the lining).
- Cut a strip of elastic that is half the circumference of your head minus 4 cm. This strip will be used to adjust the scrub cap to fit you.
Assembly and Sewing of the Surgical " scrub cap "
Once all the pieces have been cut out, it's time to move on to assembling and sewing the scrub cap.
1. Joining the strips of the scrub cap
Place the two rectangles of fabric right sides together, aligning the edges. Pin them together, then sew along both short sides 1 cm from the edge.
2. Attaching the elastic
Turn the strip right side out and insert the elastic into the opening created by the previous seam. Pin the ends of the elastic to the two openings in the strip and adjust the elasticity to your liking. Then sew the ends of the elastic to secure them in place.
3. Sewing the top of the scrub cap
Place the fabric circle representing the top of the “ scrub cap ” on the table, right side up. Position the sewn-together strip around the circle, right side facing inward, making sure the edges align. Pin all around to hold the pieces together, then sew 1 cm from the edge.
4. Finishing touches on the surgeon' scrub cap
Turn the “ scrub cap ” right side out and adjust the band so that it fits snugly against the top. Finally, fold the open edges of the band inward and topstitch all around to securely fasten the different pieces. And there you have it—you now have a homemade surgeon’s scrub cap ! Feel free to personalize your creation by choosing fabrics with unique patterns or adding decorative elements like embroidery. You can also check out other sewing tutorials for caps to vary the styles and shapes of your scrub caps.
